POWER UNIT FOR AERIAL WORKING PLATFORM 1

This Power Unit is specially designed for aerial working platform, providing it with lifting and descending function, the quantitative pressure compensating throttle valve can make the platform descend steady.

Model Specifications

Type 型号	Motor 电机	Pump Displacemen t 泵排量(cc/r)	Tank Capacit y 油箱容积(L)	Pressure 压力 (MPa)	Mounting 安装方式	Oil Port 油口尺寸
HPU2-89GKDHEHCFF(Y)A	AC220V 0.75Kw 1440rpm 50Hz	1.6	4	18	Horizontal 卧式	G1/4"

Special Notes

1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.

2、 If you need manual oil discharge device for emergency , please specify when ordering.

3、 This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.

4、 Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.

5、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.

6、 This Hydraulic Power Unit is suitable for horizontal installation.

7、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

8、 The hydraulic oil should be replaced after the first 100 hours* use of the system, and change the oil every 3,000 hours after that.

Looking for ideal Flow Control Valves Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Power Unit Hydraulic Cylinder are quality guaranteed. We are China Origin Factory of Hydraulic Power Pack Elevator. If you have any question, please feel free to contact us.

Product Categories : POWER UNIT FOR AERIAL WORKING PLATFORM 1